Xtreme Enterprises - Xtreme Mobile Detailing
Xtreme Detailing ServicesXtreme Lube ServicesXtreme Mobile Detail Media GallerySchedule an AppointmentView Our Service AreaContact Xtreme Mobile DetailingXtreme Mobile Detailing
 
 
PAINT COLOR SANDING

Paint color sanding is a confusing term to many people. I will do my best to offer the insight to the following:

* What this process is
* Why would you use this process
* Pictures showing the actual process

What is Paint Color Sanding?
This is called color sanding because you are sanding and working on the top surface of the paint itself. When it comes to traditional paint and body, the sanding and prep work is done on what is called the base coat, or primer coat.

When painting a car, you prepare the surface of the car first, through multiple layers of primer. These layers are sprayed on, then sanded to cover up every flaw in the paint.

When a car has already been painted, then you can't go under the paint and try to fix any problems. So this process is not used to correct poor body work or blemishes underneath the color, or top coat.

What is this Process Used For?
There are many problems that a painted surface may have that can be corrected through the process of color sanding:

* Scratches
* Spider webbing
* Orange peel texture

Paint color sanding is a process for paint correction that is the most aggressive form of paint correction; aside from simply repainting a car.

Simply put, the flatter, and less scratches in the paint, the better it will look when it is waxed. The goal is to create the flattest and smoothest surface, to create a surface that will reflect the light without interference of blemishes.

The Magic of Paint Color Sanding
So, through the process of color sanding, we can literally sand the surface of the paint to create a completely flat, and scratch free surface.


The shot above is the sandpaper that can be used and is also called wet and dry because typically the sanding process is done while wet. Also note that we are talking a very fine grit of 2000 here. Typically you can start with 800 grit, move up and through the different grits to finish with 1500 to 2000.

This all depends on just how aggressive you need to go to fix whatever problem you are trying to fix.


The Prep work
Let me take you through some of the prep work steps:

* Sand paint to level 1500 or 2000 grit paper
* Tape off areas that need protection from the high speed buffer
* Polish the sanded areas graduating from heavy polish to fine polish

 

Above is the door showing how paint looks after sanding,
and before the polishing

Above shows the process of polishing one panel at a time,
and taping accordingly



The rear panel before showing plenty of that "spider-webbing" effect

The rear panel after the color sanding process showing true perfection



Above is the C-pillar showing spider webbing
and some serious deep scratches

Above is the same C-Pillar without spider-webbing
or deep scratches

 


The Final Paint Color Sanding Project

 

The results are nothing less than spectacular!

Please call for a free quote!

 







       
 

XTREME MOBILE DETAILING
Home | Corporate Overview | Services | Gallery | Appointments | Service Area | Contact Us

(858) 566-9274 • 2490 Main Street • Chula Vista, CA 91910

Copyright 2010 Xtreme Enterprises